Holden 355 Stroker Cast Pistons

YOU ARE HERE: ENGINES/VEHICLES > HOLDEN > 355 STROKER > PISTONS

Engine:   355 Stroker OHV 16v
Capacity:   5737cc
Cylinders:   V8
Bore Size:   101mm/4in
Stroke:   88mm/3.48in

CLICK HERE TO ENLARGE

  Piston Assembly Set
Part # 8MKRY9355(includes pre-gapped Piston Rings)
Sizes available: 030, 040, 060
 Piston Information  Piston Ring Information
Piston Type Cast Pre­gapped Ring Set Part # M9122
Compression Height 36.4mm/1.1433in Sizes Available: 030, 040, 060
Piston Crown Capacity 20cc File Back Ring Set Part # N/A
Dish Sizes Available: N/A
Bowl Depth 6.5mm/..255in Ring 1 Ring 2 Ring 3
Rod Length 5.7in Type

Barrel plain

Moly Coated

Reverse torsional taper face Duraflex 3 piece oil ring
Compression Ratio at
Total Clearance Volume 		9.0:1 at 91cc Width 1.2mm/0.047in 1.5mm/0.059in 3mm/0.118in
Piston Crown Thickness 7.0mm Depth 3.302mm/0.13in 4.191mm/0.165in 4.064mm/0.16in
Piston Mass 484 grams (030)



Pin Mass 120 grams
Pin Diameter 23.55mm/0.927in
Pin Locking Device
 Press Fit
Clearance Stamped on piston crown
Skirt Coated No

 
Google
© Automotive Components Limited: Reproduction in whole or in part is prohibited without written approval. Contact ACL