YOU ARE HERE: TECHNICAL DATA > ENGINE REBUILD KITS - APPLICATION GUIDE
|
| ACL RACE SERIES ENGINE REBUILD KITS |
| Make |
Engine |
Base Part No. |
Suffix |
Notes |
| Chevrolet |
350 |
RAC9352 |
XXX1 |
20cc 'D' Bowl |
| 350 |
RAC9350 |
XXX1 |
Flat Top with single valve recess |
| Ford |
3.9L |
RAC9390 |
XXX1 |
|
| 302 Windsor |
RAC9302S |
XXX1 |
Flat Top |
| 302 Cleveland |
RAC9351 |
XXX1 |
Flat Crown with Valve Pockets |
| 351 Cleveland |
RAC9351
RAC9356 |
XXX1
XXX1 |
Flat Crown with Valve Pockets
Flat Top using 6" 302 conrods |
| 377 Cleveland |
RAC9378 |
XXX1 |
10cc Bowl using Stroker Chev conrods |
| 377 Cleveland |
RAC9377 |
XXX1 |
Flat Top using Stroker Chev conrods |
| 4.0L |
RAC9400 |
XXX1 |
Bowl |
| 4.1L X Flow Alloy Head |
RAC9411 |
XXX1 |
Bowl |
| 4.1L X Flow Alloy Head |
RAC9411 |
XXX2 |
Bowl , Suits ULP engines |
| 4.1L X Flow Alloy Head |
RAC9410 |
XXX1 |
Flat Top |
| 4.1L X Flow Alloy Head |
RAC9410 |
XXX2 |
Flat Top , Suits ULP engines |
| 4.1L X Flow Alloy Head |
RAC9412 |
XXX1 |
using 200 conrod & bowl |
| 4.1L X Flow Alloy Head |
RAC9412 |
XXX2 |
using 200 conrod & bowl , suits ULP |
| Holden |
202 Blue, Black
|
RAC9096 |
XXX2 |
|
| 202 Blue, Black |
RAC9118 |
XXX2 |
Flat Top |
| 202 Red |
RAC9096 |
XXX1 |
|
| 202 Red |
RAC9118 |
XXX1 |
Flat Top |
| 253 Blue, Black |
RAC9115 |
XXX2 |
|
| 253 Blue, Black |
RAC9119 |
XXX2 |
Flat Top |
| 253 Red |
RAC9115 |
XXX1 |
|
| 253 Red |
RAC9119 |
XXX1 |
Flat Top |
| 3.8 V6 (VN - 5/88-11/90) |
RAC9380 |
XXX1 |
|
3.8 V6
(VN, VP, VR 11/90-4/95) |
RAC9380 |
XXX2 |
|
| 308 Blue, Black |
RAC9500 |
XXX2 |
|
| 308 Red |
RAC9500 |
XXX1 |
|
| 355 Red Stroker |
RAC9355 |
XXX1 |
round bowl using Chev conrods |
| 355 Blue Black Stroker |
RAC9355 |
XXX2 |
round bowl using Chev conrods |
| 5.0L |
RAC9490 |
XXX1 |
Flat Top |
| 5.7L |
RAC9571 |
XXX1 |
Round Bowl |
| 5.7L |
RAC9570 |
XXX1 |
'D' Bowl |
Suffix Explanation:
The three X's in the table above represent the size of the piston/rings, rod bearings and main bearings respectively. Each size is represented by a letter as follows :
A = STD
B = 010" / 0.25mm
C = 020" / 0.50mm
D = 030" / 0.75mm
E = 040" / 1.00mm
F = 050" / 1.25mm
G = 060" / 1.50mm
e.g. If you require a RAC9400 kit with pistons/rings at 030" over, rods at 010" under and mains at 020" under, the part number with suffix would be RAC9400 DBC1.
|
